SPG-50K-25AB-GB is an automatic induction melting and casting system inside a dual-chamber glove. It can melt and cast 10 samples per batch within 8 hours once the crucibles and molds are put into the antechamber of the glovebox.

If combining an AGV to load and unload a sample tray, the system can work 24/7 automatically for high throughput of the discovery of new generation complex alloys.

SPECIFICATIONS:

Induction Heaters	80KHz, 15KW, 208- 240VAC, 50/60 Hz, three-phase, for max working temperature of 2000ºC
Glovebox	The dual chamber glovebox is made of stainless steel 304 Dimensions: 2400mm(L) x 800mm(W) x 930mm(H) Openable front window panel (tempered glass, 8 mm thick) Antechamber doors can be opened and closed automatically as programmed in the control panel Gas purification system with automatic purging and regeneration function Gas purification: O2 < 1 ppm and H2O < 1 ppm Click the pic in the left to see the detailed specification.
Induction Heater	A water-cooled Induction coil with thermal insulation and a liftable cover is placed inside the glovebox. One rotary blade is built to string melt 10 graphite crucibles are included in a tray 10 copper casting molds are included in a water-cooled station The Induction heater is tiltable for casting melt into a water-cooled copper crucible.
Cucible and Casting mold	10 melting crucibles are made of graphite 10 casting mold is made of copper with water cooling. Crucible and mold size can be made upon request
Temperature Controller	Precision digital temperature controller with Automatic PID tuning 30 segments programmable for controlling heating and cooling rate as well as dwell time Overheating & thermocouple failure protection +/- 2 ºC temperature accuracy The thermal couple is included, and the T/C type is dependent on the maximum. melting temperature
Operation control	The processing procedure is controlled by a computer as follows: The outside door of the antechamber opens Put the crucible and casting mold in the antechamber manually or AGV After vacuum and inert gas purging, the robotic arm put crucible tray in a station Put a crucible into the induction coil, and start heating and stirring after melting After melting, open the heater cover, tilt the crucible, let melt cast into a water-cooled mold Put the mold back in the tray station, then repeat the melting cost Roughly need 50 minutes to finish one sample
Water Chiller	Temperature range: 5 - 30°C Water Flow Rate: 58 L/min Water Tank: 15 Liters made of stainless steel
Compliance	NRTL or CSA Certification is available upon request at an extra cost
Updtate	This system can combine an AGV to achieve automatic load and unload crucble and a casted mold and work 24/7 continuously

High-Throughput Alloy Melting & Casting

10 Crucibles Automatic Induction Melting and Casting System with Stirring Function up to 2000ºC- SPG50K25AB-GB