1200°C Max. Swingable Dual Heating-zone High Pressure Furnace -10 MPa for GaN Crystal Growth - CM-HIP-2-II
HomeStore

1200°C Max. Swingable Dual Heating-zone High Pressure Furnace -10 MPa for GaN Crystal Growth - CM-HIP-2-II

1200°C Max. Swingable Dual Heating-zone High Pressure Furnace -10 MPa for GaN Crystal Growth - CM-HIP-2-II

CM-HIP-2-II is a swingable dual heating-zone, high-pressure furnace up to 10 MPa @ 1200°C. It is designed especially for crystal growth, such as flux method, ammonia-thermal method, or LPE for GaN or YIG. It can also be used as a conventional Hot Isostatic Pressing (HIP) furnace. 

Specifications

 Furnace Structure
  • The furnace chamber is made of stainless steel (SS304) with water cooling
  • Max. pressure 10 MPa @1200ºC
  • Swingable drive by a gear motor.
  • Two heating zones of 80 mm ID x 120 mm H each, separated by a ceramic plate (300 mm thick).
  • One explosive-proof steel cover is included. The furnace can be slid into the box for safe operation
  • The mobile cart is included for easy moving
  • Patented #: 201510417026.0. 
Furnace Chamber
      
  • The furnace Chamber is made of SS304 steel with a water cooling jacket.
    • Ø310 × Ø205 × H250 mm
  • One digital high-pressure transmitter is included.
  • Two water-cooled high-pressure electric feedthrough are built into the chamber for resistance heating
  • G1/4 gas inlet and outlet with high-pressure needle valves are included (Pic 1)
  • The mechanical pressure relief valve is installed (Pic 2)
  • One KJ6200 water chiller is included (Pic 3)
  • The chamber is swingable ±15 degrees by a gear motor to make a uniform melting flux. 

 

                

 
Heating Zone

   
  • Mo or Ni-Cr-Al resistance wire is used as heating element heating with moly reflection plates
  • Two heating zones with the dimension below:
    • Inside Diameter 80 mm
    • Length 130 mm
  • Max. Working Temperature: 1200ºC max. at 10 MPa
  • Heating Rate: 5 ºC/min
  • Optional: The furnace can be upgraded 1500°C at the extra cost
 Temperature Control
  • Two Eurotherm 3000 series temperature controllers are installed to control two heating zones independently.
  • Single loop, 24 temperature segments for ramping, cooling, and dwelling.
  • Temperature fluctuation: ±0.1ºC
  • RS485 port is built-in for PC operation
  • Operation software is included for remote control
  • Brand new laptop with the pre-installed software is available upon request.
 Vacuum Level
  • The furnace also can be used as a vacuum furnace with an optional vacuum pump
    • Double stage mechanical pump can reach 10E-2 torr
    • Turbopump can reach 10E-5 torr
     
 Power 
  • 208 - 240VAC, 50-60 Hz
  • 10 KW Max.
Compliance
  • CE Certified
  • The furnace is ready to pass NRTL(UL61010) or CSA certification at extra cost.
Application Note
  • The furnace can be used as a HIP furnace to treat samples up to 200 mm L x 3" Dia.
  • The furnace can be used for GaN single crystal growth by flux and ammonia-thermal method

 

$55,999.30

Original: $159,998.00

-65%
1200°C Max. Swingable Dual Heating-zone High Pressure Furnace -10 MPa for GaN Crystal Growth - CM-HIP-2-II—

$159,998.00

$55,999.30

More Images

1200°C Max. Swingable Dual Heating-zone High Pressure Furnace -10 MPa for GaN Crystal Growth - CM-HIP-2-II - Image 2
1200°C Max. Swingable Dual Heating-zone High Pressure Furnace -10 MPa for GaN Crystal Growth - CM-HIP-2-II - Image 3
1200°C Max. Swingable Dual Heating-zone High Pressure Furnace -10 MPa for GaN Crystal Growth - CM-HIP-2-II - Image 4

1200°C Max. Swingable Dual Heating-zone High Pressure Furnace -10 MPa for GaN Crystal Growth - CM-HIP-2-II

CM-HIP-2-II is a swingable dual heating-zone, high-pressure furnace up to 10 MPa @ 1200°C. It is designed especially for crystal growth, such as flux method, ammonia-thermal method, or LPE for GaN or YIG. It can also be used as a conventional Hot Isostatic Pressing (HIP) furnace. 

Specifications

 Furnace Structure
  • The furnace chamber is made of stainless steel (SS304) with water cooling
  • Max. pressure 10 MPa @1200ºC
  • Swingable drive by a gear motor.
  • Two heating zones of 80 mm ID x 120 mm H each, separated by a ceramic plate (300 mm thick).
  • One explosive-proof steel cover is included. The furnace can be slid into the box for safe operation
  • The mobile cart is included for easy moving
  • Patented #: 201510417026.0. 
Furnace Chamber
      
  • The furnace Chamber is made of SS304 steel with a water cooling jacket.
    • Ø310 × Ø205 × H250 mm
  • One digital high-pressure transmitter is included.
  • Two water-cooled high-pressure electric feedthrough are built into the chamber for resistance heating
  • G1/4 gas inlet and outlet with high-pressure needle valves are included (Pic 1)
  • The mechanical pressure relief valve is installed (Pic 2)
  • One KJ6200 water chiller is included (Pic 3)
  • The chamber is swingable ±15 degrees by a gear motor to make a uniform melting flux. 

 

                

 
Heating Zone

   
  • Mo or Ni-Cr-Al resistance wire is used as heating element heating with moly reflection plates
  • Two heating zones with the dimension below:
    • Inside Diameter 80 mm
    • Length 130 mm
  • Max. Working Temperature: 1200ºC max. at 10 MPa
  • Heating Rate: 5 ºC/min
  • Optional: The furnace can be upgraded 1500°C at the extra cost
 Temperature Control
  • Two Eurotherm 3000 series temperature controllers are installed to control two heating zones independently.
  • Single loop, 24 temperature segments for ramping, cooling, and dwelling.
  • Temperature fluctuation: ±0.1ºC
  • RS485 port is built-in for PC operation
  • Operation software is included for remote control
  • Brand new laptop with the pre-installed software is available upon request.
 Vacuum Level
  • The furnace also can be used as a vacuum furnace with an optional vacuum pump
    • Double stage mechanical pump can reach 10E-2 torr
    • Turbopump can reach 10E-5 torr
     
 Power 
  • 208 - 240VAC, 50-60 Hz
  • 10 KW Max.
Compliance
  • CE Certified
  • The furnace is ready to pass NRTL(UL61010) or CSA certification at extra cost.
Application Note
  • The furnace can be used as a HIP furnace to treat samples up to 200 mm L x 3" Dia.
  • The furnace can be used for GaN single crystal growth by flux and ammonia-thermal method

 

Product Information

Shipping & Returns

Description

CM-HIP-2-II is a swingable dual heating-zone, high-pressure furnace up to 10 MPa @ 1200°C. It is designed especially for crystal growth, such as flux method, ammonia-thermal method, or LPE for GaN or YIG. It can also be used as a conventional Hot Isostatic Pressing (HIP) furnace. 

Specifications

 Furnace Structure
  • The furnace chamber is made of stainless steel (SS304) with water cooling
  • Max. pressure 10 MPa @1200ºC
  • Swingable drive by a gear motor.
  • Two heating zones of 80 mm ID x 120 mm H each, separated by a ceramic plate (300 mm thick).
  • One explosive-proof steel cover is included. The furnace can be slid into the box for safe operation
  • The mobile cart is included for easy moving
  • Patented #: 201510417026.0. 
Furnace Chamber
      
  • The furnace Chamber is made of SS304 steel with a water cooling jacket.
    • Ø310 × Ø205 × H250 mm
  • One digital high-pressure transmitter is included.
  • Two water-cooled high-pressure electric feedthrough are built into the chamber for resistance heating
  • G1/4 gas inlet and outlet with high-pressure needle valves are included (Pic 1)
  • The mechanical pressure relief valve is installed (Pic 2)
  • One KJ6200 water chiller is included (Pic 3)
  • The chamber is swingable ±15 degrees by a gear motor to make a uniform melting flux. 

 

                

 
Heating Zone

   
  • Mo or Ni-Cr-Al resistance wire is used as heating element heating with moly reflection plates
  • Two heating zones with the dimension below:
    • Inside Diameter 80 mm
    • Length 130 mm
  • Max. Working Temperature: 1200ºC max. at 10 MPa
  • Heating Rate: 5 ºC/min
  • Optional: The furnace can be upgraded 1500°C at the extra cost
 Temperature Control
  • Two Eurotherm 3000 series temperature controllers are installed to control two heating zones independently.
  • Single loop, 24 temperature segments for ramping, cooling, and dwelling.
  • Temperature fluctuation: ±0.1ºC
  • RS485 port is built-in for PC operation
  • Operation software is included for remote control
  • Brand new laptop with the pre-installed software is available upon request.
 Vacuum Level
  • The furnace also can be used as a vacuum furnace with an optional vacuum pump
    • Double stage mechanical pump can reach 10E-2 torr
    • Turbopump can reach 10E-5 torr
     
 Power 
  • 208 - 240VAC, 50-60 Hz
  • 10 KW Max.
Compliance
  • CE Certified
  • The furnace is ready to pass NRTL(UL61010) or CSA certification at extra cost.
Application Note
  • The furnace can be used as a HIP furnace to treat samples up to 200 mm L x 3" Dia.
  • The furnace can be used for GaN single crystal growth by flux and ammonia-thermal method

 

You may also like

-65%NEW
Thumbnail 1Thumbnail 2

2200ºC Top Seeded Solution Growth (TSSG) Furnace - VTF2200XTSSG

$85,998.00

$30,099.30

-65%NEW
Thumbnail 1Thumbnail 2

Liquid Phase Epitaxial Crystal Growth Furnace up to 1700C - VBF-1700X-LPE

$79,985.00

$27,994.75

NEW
Thumbnail 1Thumbnail 2

5-Zone LPE Growth Furnace For YIG Film (1200C Max.) - VTF-1200X-LPE

$154,985.00

-65%NEW
Thumbnail 1Thumbnail 2

1100 ºC 3-zone Top Seeded Solution Growth (TSSG) Furnace - VTF1200XIIITSSG

$49,985.00

$17,494.75

-65%NEW
Thumbnail 1Thumbnail 2

1200 ºC Max. Top Seeded Solution Growth (TSSG) Furnace - VTF1200TSSG

$24,998.00

$8,749.30

NEW
Thumbnail 1Thumbnail 2

Crystal Grower By Vacuum Levitation Melting - SKJ-LCZ

$315,000.00

NEW
Thumbnail 1Thumbnail 2

1650°C Vacuum Induction Zone Melting System for Directional Solidification - SKJ1650ZM

$79,998.00

NEW
Thumbnail 1Thumbnail 2

Arc Melting Czochralski (CZ) Crystal Growth Furnace with Four Electrodes up to 3000°C - SKJ-ARC

$259,986.00

NEW
Thumbnail 1Thumbnail 2

1000°C Max. Compact Zone Melting Furnace for Directional Solidification - OTF-1000-CBZ

$29,998.00

-65%NEW
Thumbnail 1Thumbnail 2

400C Max. Zone Melting Furnace for Directional Solidification and Purification - OTF-1000XCBZ-AB

$49,986.00

$17,495.10

-65%NEW
Thumbnail 1Thumbnail 2

Small CZ Crystal Grower System for < 1" Single Crystals up to 2100C - IMCS-2000-CZ

$79,998.00

$27,999.30