45T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE
HomeStore

45T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE

45T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE

YLJ-40TA-PE is an electric lab press up to 45 metric tons to prepare the compound ceramic or powder metallurgical sample. The electric hydraulic pump is separated from the pressing machine, which makes maintenance and replacement at easy. The pump's pressure is 30 segments programmable for pressure and dwell time. One KF40 feedthrough is installed with the high-pressure pipe, which allows customers to use the press inside the glovebox.
 
Specifications:

Motorized  Hydraulic Pump

 
  • Input Voltage:208-240VAC, 50/60Hz (110V version is available via 500W transformer)
  • Output Power: 150W
  • 180 W AC motor
  • Built-in digital pressure controller, which is 30 segments programmable to set up multi-pressure and dwell time during raising pressure. (Pressure settings have to be monotonically increasing. Multi-step pressure relief is not allowed.)
  • A one-pump speed controller is built to adjust the pump speed
  • KF40 feed-through can be installed on the pipe, which allows the pipe is inserted into a glovebox and connected to the press machine. The feedthrough is not included in the standard package and can be ordered at an extra cost.
  • RS-485 port is built on the control panel for PC operation.
  • PC software based on LabVIEW is available upon request at an extra cost. ( You must inform us in advance if you need PC operation, and we suggest you buy a laptop from us for pre-test )

An optional touch-screen electric pump

An electric hydraulic pump with a touch-screen controller is available upon request at an extra cost. It can set all parameters, such as the inner diameter of the pressing die, target pressure, and pressing time, and then the user can touch the button to go.

Please click the picture to the left to review specs and order
Max. Pressure 
  • 40 Metric tons for the pressing machine
  • 65 MPa for the electric pump
  • The transparent protection cover is built in the front of the pressing machine
 Pressure Accuracy
  • ±0.5MPa in high pumping speed ±0.1 MPa in low pumping speed
Hydraulic Oil
  • ISO46, 1.5 L
Hydraulic Hose
  • ZG3/8, 1 meter long
Optional KF-40 feedthrough
  • 3 3-meter-long hydraulic hose with a KF40 feedthrough flange is optional, which allows the machine to work inside the glove box.
Hydraulic Cylinder Travel Distance
  • 0 - 12 mm
Working Space
  • 150mm x 150mm x 150mm
Gauge Pressure Value to Force Conversion

Pressure Display on the (MPa)

11

17

27

30

36

42

49

57

Force on Hydraulic Cylinder (T)

10

15

20

25

30

35

40

45

P = T x g x 10/ (πr^2)
    • P: pressure (Mpa) applied to your working piece
    • T: force (metric ton) applied to the pressure vessel cylinder
    • g: standard gravity. g ≈ 9.8 m/s2
    • π: ~3.14
    • r: radius (cm) of the pressure vessel (4.95 cm)
    • *1000 Kg = 1 Metric Ton; 1 Mpa = 10 Kg/cm2
Operation Temperature
  • 10 - 40°C
Overall Dimension 
  • Pressing Unit Dimensions: 240mm x 210mm x 670mm (L x W x H, H is included with the handwheel lifting to the highest position )
  • Control Unit Dimensions: 220mm x 200mm x 480mm (L x W x H)
Pressing Die (Optional) Pressing dies with various diameters are available upon request at an extra cost
Compliance
  • CE Certified
Application Notes
  • The pressing die is suggested to be used with a particle size < 30 microns. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damage to the sleeve. You must clean the die very carefully after each use. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 micron particles from the powder clumps. Please clean the mold with ethanol after the completion of each experiment
  • Do not raise the bottom cylinder (piston) more than its maximum traveling distance (25 mm)
  • The press can be put in a glovebox
 
  • Warning: Customers must always wear protective goggles during operation !!!

Packing List:
Name Qty
1 Main machine (40T hydraulic pressing machine) with electronic hydraulic pump 1 unit
2 Allen Hex Wrench 1 set
4 Manual CD 1 pc

 

$7,695.00
45T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE—
$7,695.00

More Images

45T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE - Image 2
45T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE - Image 3

45T Lab Press with Programmable Electric Hydraulic Pump - YLJ-40TA-PE

YLJ-40TA-PE is an electric lab press up to 45 metric tons to prepare the compound ceramic or powder metallurgical sample. The electric hydraulic pump is separated from the pressing machine, which makes maintenance and replacement at easy. The pump's pressure is 30 segments programmable for pressure and dwell time. One KF40 feedthrough is installed with the high-pressure pipe, which allows customers to use the press inside the glovebox.
 
Specifications:

Motorized  Hydraulic Pump

 
  • Input Voltage:208-240VAC, 50/60Hz (110V version is available via 500W transformer)
  • Output Power: 150W
  • 180 W AC motor
  • Built-in digital pressure controller, which is 30 segments programmable to set up multi-pressure and dwell time during raising pressure. (Pressure settings have to be monotonically increasing. Multi-step pressure relief is not allowed.)
  • A one-pump speed controller is built to adjust the pump speed
  • KF40 feed-through can be installed on the pipe, which allows the pipe is inserted into a glovebox and connected to the press machine. The feedthrough is not included in the standard package and can be ordered at an extra cost.
  • RS-485 port is built on the control panel for PC operation.
  • PC software based on LabVIEW is available upon request at an extra cost. ( You must inform us in advance if you need PC operation, and we suggest you buy a laptop from us for pre-test )

An optional touch-screen electric pump

An electric hydraulic pump with a touch-screen controller is available upon request at an extra cost. It can set all parameters, such as the inner diameter of the pressing die, target pressure, and pressing time, and then the user can touch the button to go.

Please click the picture to the left to review specs and order
Max. Pressure 
  • 40 Metric tons for the pressing machine
  • 65 MPa for the electric pump
  • The transparent protection cover is built in the front of the pressing machine
 Pressure Accuracy
  • ±0.5MPa in high pumping speed ±0.1 MPa in low pumping speed
Hydraulic Oil
  • ISO46, 1.5 L
Hydraulic Hose
  • ZG3/8, 1 meter long
Optional KF-40 feedthrough
  • 3 3-meter-long hydraulic hose with a KF40 feedthrough flange is optional, which allows the machine to work inside the glove box.
Hydraulic Cylinder Travel Distance
  • 0 - 12 mm
Working Space
  • 150mm x 150mm x 150mm
Gauge Pressure Value to Force Conversion

Pressure Display on the (MPa)

11

17

27

30

36

42

49

57

Force on Hydraulic Cylinder (T)

10

15

20

25

30

35

40

45

P = T x g x 10/ (πr^2)
    • P: pressure (Mpa) applied to your working piece
    • T: force (metric ton) applied to the pressure vessel cylinder
    • g: standard gravity. g ≈ 9.8 m/s2
    • π: ~3.14
    • r: radius (cm) of the pressure vessel (4.95 cm)
    • *1000 Kg = 1 Metric Ton; 1 Mpa = 10 Kg/cm2
Operation Temperature
  • 10 - 40°C
Overall Dimension 
  • Pressing Unit Dimensions: 240mm x 210mm x 670mm (L x W x H, H is included with the handwheel lifting to the highest position )
  • Control Unit Dimensions: 220mm x 200mm x 480mm (L x W x H)
Pressing Die (Optional) Pressing dies with various diameters are available upon request at an extra cost
Compliance
  • CE Certified
Application Notes
  • The pressing die is suggested to be used with a particle size < 30 microns. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damage to the sleeve. You must clean the die very carefully after each use. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 micron particles from the powder clumps. Please clean the mold with ethanol after the completion of each experiment
  • Do not raise the bottom cylinder (piston) more than its maximum traveling distance (25 mm)
  • The press can be put in a glovebox
 
  • Warning: Customers must always wear protective goggles during operation !!!

Packing List:
Name Qty
1 Main machine (40T hydraulic pressing machine) with electronic hydraulic pump 1 unit
2 Allen Hex Wrench 1 set
4 Manual CD 1 pc

 

Product Information

Shipping & Returns

Description

YLJ-40TA-PE is an electric lab press up to 45 metric tons to prepare the compound ceramic or powder metallurgical sample. The electric hydraulic pump is separated from the pressing machine, which makes maintenance and replacement at easy. The pump's pressure is 30 segments programmable for pressure and dwell time. One KF40 feedthrough is installed with the high-pressure pipe, which allows customers to use the press inside the glovebox.
 
Specifications:

Motorized  Hydraulic Pump

 
  • Input Voltage:208-240VAC, 50/60Hz (110V version is available via 500W transformer)
  • Output Power: 150W
  • 180 W AC motor
  • Built-in digital pressure controller, which is 30 segments programmable to set up multi-pressure and dwell time during raising pressure. (Pressure settings have to be monotonically increasing. Multi-step pressure relief is not allowed.)
  • A one-pump speed controller is built to adjust the pump speed
  • KF40 feed-through can be installed on the pipe, which allows the pipe is inserted into a glovebox and connected to the press machine. The feedthrough is not included in the standard package and can be ordered at an extra cost.
  • RS-485 port is built on the control panel for PC operation.
  • PC software based on LabVIEW is available upon request at an extra cost. ( You must inform us in advance if you need PC operation, and we suggest you buy a laptop from us for pre-test )

An optional touch-screen electric pump

An electric hydraulic pump with a touch-screen controller is available upon request at an extra cost. It can set all parameters, such as the inner diameter of the pressing die, target pressure, and pressing time, and then the user can touch the button to go.

Please click the picture to the left to review specs and order
Max. Pressure 
  • 40 Metric tons for the pressing machine
  • 65 MPa for the electric pump
  • The transparent protection cover is built in the front of the pressing machine
 Pressure Accuracy
  • ±0.5MPa in high pumping speed ±0.1 MPa in low pumping speed
Hydraulic Oil
  • ISO46, 1.5 L
Hydraulic Hose
  • ZG3/8, 1 meter long
Optional KF-40 feedthrough
  • 3 3-meter-long hydraulic hose with a KF40 feedthrough flange is optional, which allows the machine to work inside the glove box.
Hydraulic Cylinder Travel Distance
  • 0 - 12 mm
Working Space
  • 150mm x 150mm x 150mm
Gauge Pressure Value to Force Conversion

Pressure Display on the (MPa)

11

17

27

30

36

42

49

57

Force on Hydraulic Cylinder (T)

10

15

20

25

30

35

40

45

P = T x g x 10/ (πr^2)
    • P: pressure (Mpa) applied to your working piece
    • T: force (metric ton) applied to the pressure vessel cylinder
    • g: standard gravity. g ≈ 9.8 m/s2
    • π: ~3.14
    • r: radius (cm) of the pressure vessel (4.95 cm)
    • *1000 Kg = 1 Metric Ton; 1 Mpa = 10 Kg/cm2
Operation Temperature
  • 10 - 40°C
Overall Dimension 
  • Pressing Unit Dimensions: 240mm x 210mm x 670mm (L x W x H, H is included with the handwheel lifting to the highest position )
  • Control Unit Dimensions: 220mm x 200mm x 480mm (L x W x H)
Pressing Die (Optional) Pressing dies with various diameters are available upon request at an extra cost
Compliance
  • CE Certified
Application Notes
  • The pressing die is suggested to be used with a particle size < 30 microns. Small particles may slip into the gap between the pushing rod and steel sleeve and cause damage to the sleeve. You must clean the die very carefully after each use. Please consider using the 3'' Dia. Sieve Set No.200&450 Mesh to separate the 32~75 micron particles from the powder clumps. Please clean the mold with ethanol after the completion of each experiment
  • Do not raise the bottom cylinder (piston) more than its maximum traveling distance (25 mm)
  • The press can be put in a glovebox
 
  • Warning: Customers must always wear protective goggles during operation !!!

Packing List:
Name Qty
1 Main machine (40T hydraulic pressing machine) with electronic hydraulic pump 1 unit
2 Allen Hex Wrench 1 set
4 Manual CD 1 pc