Square or Rectangular Pressing Die (customizable, maximum size 80x80 mm) - Die-SP-XX

Die-SP-XX is a customizable square tableting mold, used to press square samples of easily formed materials. The size can be customized according to customer requirements, and the maximum side length of the die core can be 80mm.

SPECIFICATION:

Maximum pressure the mold can withstand	600MPa
Mold material	Hardness HRC60-62 Roughness Ra0.08μm All tablet pressing dies are made of high-tensile, high-carbon steel with high hardness and high wear resistance, meeting the requirements for pressing ceramic and metal materials. The sample pressing surface may be scratched.
Mold size and weight	Sample size (mm) 3 x 3~10 x 10 12 x 12 ~ 20 x 20 22 x 22 ~ 30 x 30 31 x 31 ~ 40 x 40 50 x 50 60 x 60 70 x 70 Inner cavity depth 20mm 30mm 40mm 45mm 55mm 60mm 70mm Overall mold size (mm) Φ 43 x 93mm Φ53 x 120mm Φ73 x 133mm Φ88 x 150mm Φ98 x 150mm Φ118 x 180mm Φ138 x 180mm Net weight 0.65kg 1.2kg 2.4kg 4.8kg 7.3kg 11.4kg 20kg
Maximum operating temperature	280°C
Safety measures	To avoid accidents and mold damage, please read the usage and installation instructions carefully before first use. Read the operating manual before operation, especially the installation instructions. Do not compress flammable and corrosive materials  Operators must wear protective eyewear The press of the die must be equipped with a protective cover To avoid damaging the core and sleeve, we strongly recommend using a laboratory press to press the samples to ensure uniform pressure at the press interface. Dies with small inner diameters (≤10mm) are more susceptible to eccentric compression, resulting in premature ejector failure, well below rated load. Please place the top/bottom plates and align the die with the centerline of the press.
Application Notes	Clean the mold with ethanol before and after each use. After use, coat the mold with anti-rust oil, put it back into the original packaging box and place it in a dry place to prevent the mold from rusting.