Lab Spray Dryer up to 300°C with Glass Chambers up to 1500mL /h - MSK-USP6000
HomeStore

Lab Spray Dryer up to 300°C with Glass Chambers up to 1500mL /h - MSK-USP6000

Lab Spray Dryer up to 300°C with Glass Chambers up to 1500mL /h - MSK-USP6000

MSK-USP-6000 is a lab-scale spray dryer that generates fine particles by evaporating the atomized liquid spray and that has been collected through the cyclone separating process. It is suitable for synthesizing heat-sensitive materials for a broad range of applications, including pharmaceuticals, Nanotechnology, Catalysts, Fuel cells, and Batteries.

SPECIFICATIONS
System Features
  • A dual-channel spray nozzle with an anti-clogging function prevents the nozzle from being clogged during the spray process
  • Transparent receiving tank, drying chamber, and cyclone separator for easy process monitoring
  • Borosilicate glass chamber resists strong acid/alkali and high-temperature
  • The use of quick clamps allows easy component removal and cleaning 
  • The included air compressor is quiet (50dB) and clean (oil-mist-free)
  • Digital control panel
  • Built-in PID temperature controller for accurate Inlet/outlet air temperature control
  • The user-friendly control panel enables easy adjustment of temperature, airflow & pressure, pumping speed, and anti-clogging interval
  • Solvent feeding via a peristaltic pump, the rate is adjustable
Input Voltage & Power
  • 208~240VAC, 30 A, 50/60 Hz
  • 6000 VA
Spray Nozzle (Atomizer)
  • Compress gas-assist spray nozzle disperses spray liquid into fine droplets which are subsequently dried in the chamber
    • The dual-channel design allows the mixing and spraying of two kinds of solutions at the same time
  • Anti-clogging nozzle, auto anti-clogging interval adjustable
  • Co-current downward spray
  • Atomized particle sizes range from 10 - 50 μm
  • Spray Nozzle Size is 0.7mm Dia.
  • Recommended slurry viscosity is less than 500 cP. 
Cyclon Material Collector
  • Material collection efficiency can be as high as 80%.
  • Collect Capacity: 500 mL
Temperature Control
  • Inlet air: 30C - 300 °C
  • Outlet air: 30C - 140 °C
  • Max. working Temperature: 250 °C
  • PID temperature controller with ±1 °C accuracy
Drying Time
  • 1~1.5S
Drying Air
  • One oil-less air compressor is included
  • 35m^3 /h
  • Pressure: 5~8 bar
Peristaltic Pump
  • The solvent is fed by the peristaltic pump
  • Feeding rate adjustable: 30-2200ml/h
Evaporation Capability
  • Max. 1500ml/h
Certification
  • CE Certified
  • NRTL or CSA certification is available upon request

 

$39,985.00
Lab Spray Dryer up to 300°C with Glass Chambers up to 1500mL /h - MSK-USP6000—
$39,985.00

More Images

Lab Spray Dryer up to 300°C with Glass Chambers up to 1500mL /h - MSK-USP6000 - Image 2

Lab Spray Dryer up to 300°C with Glass Chambers up to 1500mL /h - MSK-USP6000

MSK-USP-6000 is a lab-scale spray dryer that generates fine particles by evaporating the atomized liquid spray and that has been collected through the cyclone separating process. It is suitable for synthesizing heat-sensitive materials for a broad range of applications, including pharmaceuticals, Nanotechnology, Catalysts, Fuel cells, and Batteries.

SPECIFICATIONS
System Features
  • A dual-channel spray nozzle with an anti-clogging function prevents the nozzle from being clogged during the spray process
  • Transparent receiving tank, drying chamber, and cyclone separator for easy process monitoring
  • Borosilicate glass chamber resists strong acid/alkali and high-temperature
  • The use of quick clamps allows easy component removal and cleaning 
  • The included air compressor is quiet (50dB) and clean (oil-mist-free)
  • Digital control panel
  • Built-in PID temperature controller for accurate Inlet/outlet air temperature control
  • The user-friendly control panel enables easy adjustment of temperature, airflow & pressure, pumping speed, and anti-clogging interval
  • Solvent feeding via a peristaltic pump, the rate is adjustable
Input Voltage & Power
  • 208~240VAC, 30 A, 50/60 Hz
  • 6000 VA
Spray Nozzle (Atomizer)
  • Compress gas-assist spray nozzle disperses spray liquid into fine droplets which are subsequently dried in the chamber
    • The dual-channel design allows the mixing and spraying of two kinds of solutions at the same time
  • Anti-clogging nozzle, auto anti-clogging interval adjustable
  • Co-current downward spray
  • Atomized particle sizes range from 10 - 50 μm
  • Spray Nozzle Size is 0.7mm Dia.
  • Recommended slurry viscosity is less than 500 cP. 
Cyclon Material Collector
  • Material collection efficiency can be as high as 80%.
  • Collect Capacity: 500 mL
Temperature Control
  • Inlet air: 30C - 300 °C
  • Outlet air: 30C - 140 °C
  • Max. working Temperature: 250 °C
  • PID temperature controller with ±1 °C accuracy
Drying Time
  • 1~1.5S
Drying Air
  • One oil-less air compressor is included
  • 35m^3 /h
  • Pressure: 5~8 bar
Peristaltic Pump
  • The solvent is fed by the peristaltic pump
  • Feeding rate adjustable: 30-2200ml/h
Evaporation Capability
  • Max. 1500ml/h
Certification
  • CE Certified
  • NRTL or CSA certification is available upon request

 

Product Information

Shipping & Returns

Description

MSK-USP-6000 is a lab-scale spray dryer that generates fine particles by evaporating the atomized liquid spray and that has been collected through the cyclone separating process. It is suitable for synthesizing heat-sensitive materials for a broad range of applications, including pharmaceuticals, Nanotechnology, Catalysts, Fuel cells, and Batteries.

SPECIFICATIONS
System Features
  • A dual-channel spray nozzle with an anti-clogging function prevents the nozzle from being clogged during the spray process
  • Transparent receiving tank, drying chamber, and cyclone separator for easy process monitoring
  • Borosilicate glass chamber resists strong acid/alkali and high-temperature
  • The use of quick clamps allows easy component removal and cleaning 
  • The included air compressor is quiet (50dB) and clean (oil-mist-free)
  • Digital control panel
  • Built-in PID temperature controller for accurate Inlet/outlet air temperature control
  • The user-friendly control panel enables easy adjustment of temperature, airflow & pressure, pumping speed, and anti-clogging interval
  • Solvent feeding via a peristaltic pump, the rate is adjustable
Input Voltage & Power
  • 208~240VAC, 30 A, 50/60 Hz
  • 6000 VA
Spray Nozzle (Atomizer)
  • Compress gas-assist spray nozzle disperses spray liquid into fine droplets which are subsequently dried in the chamber
    • The dual-channel design allows the mixing and spraying of two kinds of solutions at the same time
  • Anti-clogging nozzle, auto anti-clogging interval adjustable
  • Co-current downward spray
  • Atomized particle sizes range from 10 - 50 μm
  • Spray Nozzle Size is 0.7mm Dia.
  • Recommended slurry viscosity is less than 500 cP. 
Cyclon Material Collector
  • Material collection efficiency can be as high as 80%.
  • Collect Capacity: 500 mL
Temperature Control
  • Inlet air: 30C - 300 °C
  • Outlet air: 30C - 140 °C
  • Max. working Temperature: 250 °C
  • PID temperature controller with ±1 °C accuracy
Drying Time
  • 1~1.5S
Drying Air
  • One oil-less air compressor is included
  • 35m^3 /h
  • Pressure: 5~8 bar
Peristaltic Pump
  • The solvent is fed by the peristaltic pump
  • Feeding rate adjustable: 30-2200ml/h
Evaporation Capability
  • Max. 1500ml/h
Certification
  • CE Certified
  • NRTL or CSA certification is available upon request